Citroen Relay (Ii) 230 (5x130) side profile — Citroen Relay wheel fitment

Citroen Relay wheel fitment — Ii 230 5x130

The Citroen Relay (Ii) 230 (5x130) (2006–2014) uses a 5x130 bolt pattern, 78.1 mm centre bore, M16x1.5 bolts torqued to ~120 Nm. It accepts ~6.5J–6.5J wheels at ET58–ET60. That is the short version of Citroen Relay wheel fitment; the full picture is below.

Overview

The Citroën Relay (II) 230 (5x130), part of the third generation Fiat Ducato family, was introduced in September 2006 as a 2007 model worldwide except Australia and later in late 2012 for Australia. It is based on the same platform as its siblings, the Peugeot Boxer and Fiat Ducato, but with specific Citroën styling and features. This generation saw an increase in payload capacity compared to previous models, offering variants up to a maximum gross weight of 4 tonnes. The Relay was available in various configurations including van, passenger transport, and combi versions.

Citroen Relay wheel fitment

Start with the hub. The Citroen Relay (Ii) 230 (5x130) spec table gives the bolt pattern and bore; the second table is the aftermarket window for Citroen Relay wheel fitment.

Bolt pattern (PCD)5x130
Centre bore78.1 mm
Bolt / threadM16x1.5 (bolts)
Wheel-bolt torque120 Nm
Seat typetapered
Factory setupsquare
TPMSdirect

Aftermarket wheel sizes — read per position:

PositionWidthOffset
Front6.5J–6.5JET58–ET60

Go wider and the offset has to rise with it, about 8 to 10 ET per extra 1J, or the wheel pokes past the arch. The fit-check settles the exact offset and any spacer.

Browse wheels that fit a Citroen Relay →Get them fitted (UK)

UK popularity & demand

~241 Citroen Relay licensed on UK roads — top 44% of models by volume.

Based on DfT VEH0124 vehicle-parc data (2025), there are approximately 241 Citroen Relay on UK roads, placing it in the top 44% of car models by volume across our fitment database.

With that many on the road, Citroen Relay wheel fitment is a spec fitters see constantly. We keep it current for that reason.

Source: DfT/DVLA licensed-vehicle statistics (VEH0124), matched to the AIWheelTech fitment database.

Body styles & production

Produced2006–2014

Trim levels

230 (5x130)

History & notable variants

The third-generation Fiat Ducato family, which includes the Citroën Jumper (Relay), underwent a facelift in 2013 with minor styling changes and updates to interior features. This generation was produced at several international plants, including Sevel Sud in Italy, Sete Lagoas in Brazil, Karsan in Turkey, and Elabuga in Russia.

Reliability & owner notes