Fiat Ducato (Ii) 244, 244L, 244M (5x118) side profile — Fiat Ducato wheel fitment

Fiat Ducato wheel fitment — Ii 244, 244L, 244M 5x118

Before you buy wheels, the Fiat Ducato wheel fitment facts: The Fiat Ducato (Ii) 244, 244L, 244M (5x118) (2006–2015) uses a 5x118 bolt pattern, 71.1 mm centre bore, M14x1.5 bolts. It accepts ~6J–6.5J wheels at ET50–ET68.

Fiat Ducato wheel fitment

Fiat Ducato wheel fitment comes down to two things: the factory hub spec, and how far the aftermarket width and offset can move from it. Both are here for the Fiat Ducato (Ii) 244, 244L, 244M (5x118) (2006–2015).

Bolt pattern (PCD)5x118
Centre bore71.1 mm
Bolt / threadM14x1.5 (bolts)
Seat typetapered
Factory setupsquare
TPMSdirect

Aftermarket wheel sizes — read per position:

PositionWidthOffset
Front6J–6.5JET50–ET68

As a rule, each extra 1J of width wants roughly +8 to 10 ET to keep the wheel tucked. The exact offset and any spacer are confirmed by the fit-check.

Browse wheels that fit a Fiat Ducato →Get them fitted (UK)

Overview

The Fiat Ducato (II) is a light commercial vehicle developed by FCA Italy and PSA Group, manufactured since 2006 as the second major redesign of the original model. It was introduced globally in September 2006 except for Australia where it debuted later in late 2012. The vehicle comes in various configurations for both passenger transport and goods transportation, with increased weight capacities compared to its predecessor. Available in multiple wheelbase lengths (3000mm, 3450mm, 4050mm) and heights (2250mm, 2500mm, 2750mm), it offers a versatile range of options for different commercial needs.

UK popularity & demand

~590 Fiat Ducato licensed on UK roads — top 36% of models by volume.

Based on DfT VEH0124 vehicle-parc data (2025), there are approximately 590 Fiat Ducato on UK roads, placing it in the top 36% of car models by volume across our fitment database.

With that many on the road, Fiat Ducato wheel fitment is a spec fitters see constantly. We keep it current for that reason.

Source: DfT/DVLA licensed-vehicle statistics (VEH0124), matched to the AIWheelTech fitment database.

History & notable variants

Launched in September 2006 as the third generation Ducato, this model saw significant improvements over its predecessor. It was produced at Sevel Sud factory in Atessa, Italy and other international plants including Brazil, Turkey, Mexico, and Russia. The vehicle's production marked a shift towards higher volume manufacturing with an increased rate of nine vehicles per day by 2005.

Body styles & production

Produced2006–2015

Trim levels

Ducato 30Ducato 33Ducato Maxi 35Ducato Maxi 40

Reliability & owner notes