Fiat Ducato (Ii) 244, 244L, 244M (5x130) side profile — Fiat Ducato wheel fitment

Fiat Ducato wheel fitment — Ii 244, 244L, 244M 5x130

Quick answer on Fiat Ducato wheel fitment: The Fiat Ducato (Ii) 244, 244L, 244M (5x130) (1981–present) uses a 5x130 bolt pattern, 78.1 mm centre bore, M16x1.5 bolts. It accepts ~6.5J–6.5J wheels at ET52–ET65.

Fiat Ducato wheel fitment

Fiat Ducato wheel fitment comes down to two things: the factory hub spec, and how far the aftermarket width and offset can move from it. Both are here for the Fiat Ducato (Ii) 244, 244L, 244M (5x130) (1981–present).

Bolt pattern (PCD)5x130
Centre bore78.1 mm
Bolt / threadM16x1.5 (bolts)
Seat typetapered
Factory setupsquare
TPMSdirect

Aftermarket wheel sizes — read per position:

PositionWidthOffset
Front6.5J–6.5JET52–ET65

As a rule, each extra 1J of width wants roughly +8 to 10 ET to keep the wheel tucked. The exact offset and any spacer are confirmed by the fit-check.

Browse wheels that fit a Fiat Ducato →Get them fitted (UK)

Overview

The Fiat Ducato (II) 244, 244L, 244M (5x130) is part of the second generation of this light commercial vehicle developed by FCA Italy and PSA Group. It was produced from 1993 to 2006, with a facelift in 2002 that included rear and side bump mouldings and revised front grille. The engine range consisted of 2.0 JTD, 2.3 JTD 16v, and 2.8 JTD diesel engines conforming to Euro 3 standards. It was manufactured at the Sevel Sud factory in Atessa, Italy, alongside other versions like Citroën Jumper and Peugeot Boxer.

UK popularity & demand

~590 Fiat Ducato licensed on UK roads — top 36% of models by volume.

Based on DfT VEH0124 vehicle-parc data (2025), there are approximately 590 Fiat Ducato on UK roads, placing it in the top 36% of car models by volume across our fitment database.

A parc that size is why Fiat Ducato wheel fitment is worth getting exactly right: a lot of owners are shopping for these numbers.

Source: DfT/DVLA licensed-vehicle statistics (VEH0124), matched to the AIWheelTech fitment database.

History & notable variants

In February 2002, a facelift introduced rear and side bump mouldings along with a revised front grille for the second generation Ducato. The production of this generation was significant, reaching three million units by December 2005, leading to an increase in daily production rates.

Body styles & production

Produced1981–present

Trim levels

244244L244M

Reliability & owner notes