
Fiat Ducato wheel fitment — Iii -/Maxi 250, 250L 5x130
Overview
The Fiat Ducato (III) -/Maxi 250, 250L (5x130) is part of the third generation of this light commercial vehicle jointly developed by FCA Italy and PSA Group. It was introduced in September 2006 as a 2007 model worldwide except Australia, then in late 2012 for Australia as a 2013 model. The Ducato is produced at the Sevel Sud factory in Atessa, Italy, among other locations globally. This generation saw an increase in payload capacity with designations based on all-up weight: Ducato 30 (3 tonnes), Ducato 33 (3.3 tonnes), Ducato Maxi 35 (3.5 tonnes) and Ducato Maxi 40 (4 tonnes). It is available in various configurations for goods transport, including three wheelbases and three heights.
Fiat Ducato wheel fitment
Start with the hub. The Fiat Ducato (Iii) -/Maxi 250, 250L (5x130) spec table gives the bolt pattern and bore; the second table is the aftermarket window for Fiat Ducato wheel fitment.
| Bolt pattern (PCD) | 5x130 |
| Centre bore | 78.1 mm |
| Bolt / thread | M16x1.5 (bolts) |
| Seat type | tapered |
| Factory setup | square |
| TPMS | direct |
Aftermarket wheel sizes — read per position:
| Position | Width | Offset |
|---|---|---|
| Front | 6J–8J | ET50–ET68 |
Width and offset move together: roughly 8 to 10 ET more for every extra 1J keeps the wheel inside the arch. Final offset and any spacer come from the fit-check.
UK popularity & demand
Based on DfT VEH0124 vehicle-parc data (2025), there are approximately 590 Fiat Ducato on UK roads, placing it in the top 36% of car models by volume across our fitment database.
A parc that size is why Fiat Ducato wheel fitment is worth getting exactly right: a lot of owners are shopping for these numbers.
Source: DfT/DVLA licensed-vehicle statistics (VEH0124), matched to the AIWheelTech fitment database.
Engines & drivetrain
| Variant | Engine | Fuel | Power | Drive, years |
|---|---|---|---|---|
| 3.6 L Pentastar V6 | petrol | |||
| 3.0 L Iveco F1C I4 | petrol | |||
| 2.0 L Fiat Multijet I4 | diesel | |||
| 2.0 L PSA DW10 FU I4 | diesel | |||
| 2.2 L PSA DW12 RU I4 | diesel | |||
| 2.2 L Ford ZSD I4 | diesel | |||
| 2.2 L Fiat Multijet B22 I4 | diesel | |||
| 2.3 L Iveco F1A I4 | diesel |
Source: Fiat Ducato, en.wikipedia.org.
Dimensions
| Width | 2,025 mm |
| Height | 2,153 to 2,524 mm |
| Kerb weight | 1,772 to 2,610 kg |
Source: Fiat Ducato, en.wikipedia.org; EU type-approval data (EEA).
Body styles & production
| Body styles | 3-door van/minibus, 4-door van/minibus, 2-door pickup |
| Produced | 2006–2014 |
Trim levels
History & notable variants
The third generation of the Fiat Ducato was launched globally as a 2007 model except Australia where it debuted later in late 2012. This iteration saw significant improvements over its predecessor with enhanced payload capacities and more robust configurations for both goods and passenger transport. It has been produced at multiple locations including Sevel Sud, Italy; Sete Lagoas, Brazil; Akçalar, Turkey; Saltillo, Mexico; and Elabuga, Russia.
Reliability & owner notes
- Pros: Increased payload capacity; robust configurations for goods transport
- Cons: No specific cons mentioned in the reference
- Common issues: None documented