Ford Maverick /Esc. wheel fitment — 1EZ, -/R; 1N2, -/R
The Ford Maverick /Esc. 1EZ, -/R; 1N2, -/R (2001–2004) uses a 5x114.3 bolt pattern, 67.1 mm centre bore, M12x1.5 nuts. It accepts ~6.5J–9J wheels at ET30–ET46. That is the short version of Ford Maverick /Esc. wheel fitment; the full picture is below.
Ford Maverick /Esc. wheel fitment
Start with the hub. The Ford Maverick /Esc. 1EZ, -/R; 1N2, -/R spec table gives the bolt pattern and bore; the second table is the aftermarket window for Ford Maverick /Esc. wheel fitment.
| Bolt pattern (PCD) | 5x114.3 |
| Centre bore | 67.1 mm |
| Bolt / thread | M12x1.5 (nuts) |
| Seat type | tapered |
| Factory setup | square |
| TPMS | none |
Aftermarket wheel sizes — read per position:
| Position | Width | Offset |
|---|---|---|
| Front | 6.5J–9J | ET30–ET46 |
Width and offset move together: roughly 8 to 10 ET more for every extra 1J keeps the wheel inside the arch. Final offset and any spacer come from the fit-check.
Body styles & production
| Produced | 2001–2004 |
Factory colours
Ivy Green MetallicDive MetallicOcean PearlBlush PearlCafe MetallicSmoke Gray MetallicFrozen WhiteAluminum MetallicSea Grey MetallicMeteor Gray MicaAzul Carmel Pearl MetallicSaber MetallicCool WhiteSchool Bus YellowVermilionMetalicious MetallicTrim Silver MetallicDiamond WhiteWinter WhiteArctic White