Ford Mondeo wheel fitment — IV

By Torque, AIWheelTech vehicle & fitment specialist · 1992–present

The Ford Mondeo (IV) (1992–present) uses a 5x108 bolt pattern, 63.4 mm centre bore, M12x1.5 nuts torqued to ~130 Nm. It accepts ~6.5J–7.5J wheels at ET35–ET55 front; staggered setups run 8.5J–9J rear (ET36–ET55). That is the short version of Ford Mondeo wheel fitment; the full picture is below.

Overview

The fourth-generation Ford Mondeo, introduced in January 2012, was marketed as the Fusion in North America. It was designed to consolidate Ford's mid-size car offerings globally and used a global platform shared with its American counterpart. The design took cues from both previous generations of the Mondeo and the American Fusion. This generation did not include five- or six-cylinder engines but featured a complete range of EcoBoost engines upon launch. Production ended in March 2022 as consumer interest shifted towards crossovers and SUVs.

History & notable variants

The fourth-generation Mondeo was presented at the North American International Auto Show in Detroit, marking its global debut. It was not marketed in North America or Europe after this generation but continued to be sold in China and Middle East markets under different names (Fusion and Taurus respectively). Notable for its EcoBoost engine lineup and Kinetic Design theme introduced mid-cycle in 2010.

Ford Mondeo wheel fitment

Everything below is what the fit-check uses for Ford Mondeo wheel fitment: the factory bolt spec first, then the width and offset window that clears the arches and the brakes on the Ford Mondeo (IV).

Aftermarket wheel sizes — read per position:

As a rule, each extra 1J of width wants roughly +8 to 10 ET to keep the wheel tucked. The exact offset and any spacer are confirmed by the fit-check.

UK popularity & demand

Based on DfT VEH0124 vehicle-parc data (2025), there are approximately 157,767 Ford Mondeo on UK roads, placing it in the top 2% of car models by volume across our fitment database.

That makes Ford Mondeo wheel fitment a high-demand spec to keep in stock. It is one reason we track it here.

Source: DfT/DVLA licensed-vehicle statistics (VEH0124), matched to the AIWheelTech fitment database.

Body styles & production

Factory colours

Trim levels

Reliability & owner notes

• Pros: Global platform sharing with Fusion; EcoBoost engine lineup; Kinetic Design theme
• Cons: Not marketed in North America or Europe after this generation; production ended early due to market shift towards SUVs and crossovers