Mercedes C204/205 4matic Phev side profile — Mercedes C Class wheel fitment

Mercedes C Class wheel fitment — C204/205 4matic Phev

By Torque, AIWheelTech vehicle & fitment specialist · 2020–2023
The Mercedes C204/205 4matic Phev (2020–2023) uses a 5x112 bolt pattern, 66.6 mm centre bore, M14x1.5 bolts torqued to ~120 Nm. It accepts ~7J–8.5J wheels at ET18–ET49 front; staggered setups run 8.5J–10J rear (ET23–ET56). That is the short version of Mercedes C Class wheel fitment; the full picture is below.

Overview

The Mercedes-Benz C-Class, specifically the fifth generation (W206) launched on 23 February 2021, is a compact executive car produced by Mercedes-Benz Group AG. This generation features an integrated starter generator and a 48-volt electrical system across all models equipped with four-cylinder engines. The W206 platform includes sedan, wagon (All-Terrain), coupe, and cabriolet body styles. Production commenced at the Bremen plant in Germany and expanded to other international plants. In China, it was launched as a long-wheelbase version (V206).

History & notable variants

The fifth generation W206 C-Class made its debut on 23 February 2021 with significant advancements in technology and design compared to the previous models. It introduced an integrated starter generator for improved efficiency, marking a shift towards electrification within the compact executive segment. The model also received external body cladding, increased ride height, and all-wheel drive (4MATIC) options on certain variants.

Mercedes C Class wheel fitment

Everything below is what the fit-check uses for Mercedes C Class wheel fitment: the factory bolt spec first, then the width and offset window that clears the arches and the brakes on the Mercedes C204/205 4matic Phev.

Bolt pattern (PCD)5x112
Centre bore66.6 mm
Bolt / threadM14x1.5 (bolts)
Wheel-bolt torque120 Nm
Seat typeradius
Factory setupstaggered
TPMSdirect
Run-flatYes

Aftermarket wheel sizes — read per position:

PositionWidthOffset
Front7J–8.5JET18–ET49
Rear (staggered)8.5J–10JET23–ET56

As a rule, each extra 1J of width wants roughly +8 to 10 ET to keep the wheel tucked. The exact offset and any spacer are confirmed by the fit-check.

Browse wheels that fit a Mercedes C Class →Get them fitted (UK)

UK popularity & demand

~340,482 Mercedes C Class licensed on UK roads — top 1% of models by volume.

Based on DfT VEH0124 vehicle-parc data (2025), there are approximately 340,482 Mercedes C Class on UK roads, placing it in the top 1% of car models by volume across our fitment database.

With that many on the road, Mercedes C Class wheel fitment is a spec fitters see constantly. We keep it current for that reason.

Source: DfT/DVLA licensed-vehicle statistics (VEH0124), matched to the AIWheelTech fitment database.

Body styles & production

Produced2020–2023

Factory colours

Obsidian Black MetallicDesigno Meerblau MetallicMystic Blue PearlDesigno Mocha Black MetallicDesigno Graphite Green MetallicDesigno Platinum Black MetallicMagno Kaschmirweiss Metallic MattePlatin Metallic MatteDesigno Nachtschwarz Metallic MattePolar WhiteMagnetitschwarz MetallicJade Green MetallicBlack , Deep Black , TiefschwarzDesigno Kaschmirweiss Metallic MatteNautikblau MetallicArctic WhiteDesert Silver MetallicBrillantsilber MetallicSteel Gray Metallic , Tenoritgrau MetallicPolar Silver Metallic

Trim levels

AvantgardeExclusiveSportAMG Line

Reliability & owner notes