Mercedes CLS-Class AMG wheel fitment — CLS 63 C219
The Mercedes CLS 63 C219 (2007–2012) uses a 5x112 bolt pattern, 66.6 mm centre bore, M14x1.5 bolts torqued to ~120 Nm. It accepts ~8.5J–9.5J wheels at ET19–ET30 front; staggered setups run 8.5J–11J rear (ET19–ET30). That is the short version of Mercedes CLS-Class AMG wheel fitment; the full picture is below.
Mercedes CLS-Class AMG wheel fitment
Everything below is what the fit-check uses for Mercedes CLS-Class AMG wheel fitment: the factory bolt spec first, then the width and offset window that clears the arches and the brakes on the Mercedes CLS 63 C219.
| Bolt pattern (PCD) | 5x112 |
| Centre bore | 66.6 mm |
| Bolt / thread | M14x1.5 (bolts) |
| Wheel-bolt torque | 120 Nm |
| Seat type | radius |
| Factory setup | staggered |
| TPMS | direct |
| Run-flat | Yes |
Aftermarket wheel sizes — read per position:
| Position | Width | Offset |
|---|---|---|
| Front | 8.5J–9.5J | ET19–ET30 |
| Rear (staggered) | 8.5J–11J | ET19–ET30 |
As a rule, each extra 1J of width wants roughly +8 to 10 ET to keep the wheel tucked. The exact offset and any spacer are confirmed by the fit-check.
Body styles & production
| Produced | 2007–2012 |
Factory colours
Weiss SolidSchwarz SolidSudseeblau MetallicLight Ivory SolidElbaitgruen Effect MetallicKosmosschwarz Metallicopalorange matt