
Toyota Camry Hybrid wheel fitment — XV70, Inc Facelift
Toyota Camry Hybrid wheel fitment
Toyota Camry Hybrid wheel fitment comes down to two things: the factory hub spec, and how far the aftermarket width and offset can move from it. Both are here for the Toyota Camry Hybrid XV70, Inc Facelift (1982–present).
| Bolt pattern (PCD) | 5x114.3 |
| Centre bore | 60.1 mm |
| Bolt / thread | M12x1.5 (nuts) |
| Seat type | flat |
| Factory setup | square |
| Brakes | e6*2007/46*0322*..;e13*2007/46*2046*.. |
| TPMS | direct |
Aftermarket wheel sizes — read per position:
| Position | Width | Offset |
|---|---|---|
| Front | 6.5J–9J | ET11–ET45 |
Go wider and the offset has to rise with it, about 8 to 10 ET per extra 1J, or the wheel pokes past the arch. The fit-check settles the exact offset and any spacer.
Overview
The Toyota Camry Hybrid XV70 Inc Facelift is part of the XV70 generation of the Toyota Camry. This hybrid variant was introduced as an evolution of the previous generation with enhanced fuel efficiency and performance improvements, targeting environmentally conscious consumers in mid-size sedan markets globally. It features a sleeker design aesthetic compared to its predecessor, incorporating aerodynamic enhancements for better fuel economy while maintaining the comfort and spaciousness expected from a Toyota Camry.
Engines & drivetrain
| Variant | Engine | Fuel | Power | Drive, years |
|---|---|---|---|---|
| ASV71 (FWD) | 2.0 L 6AR-FSE inline-four (petrol) | petrol | 123 kW (167 PS) | |
| ASV71 (FWD) | 2.0 L 6AR-FBS inline-four (petrol) | petrol | 123 kW (167 PS) | |
| MXVA71 (FWD) | 2.0 L M20A-FKS inline-four (petrol) | petrol | 131 kW (178 PS) | |
| ASV70 (FWD) | 2.5 L 2AR-FE inline-four (petrol) | petrol | 132 kW (179 PS) | |
| AXVA70 (FWD) | 2.5 L A25A-FKS inline-four (petrol) | petrol | 152 kW (207 PS) | |
| AXVA70 (FWD) | 2.5 L A25A-FKS inline-four (petrol) | petrol | 154 kW (209 PS) | |
| AXVA70 (FWD) | 2.5 L A25A-FKB inline-four (petrol) | petrol | 154 kW (209 PS) | |
| AXVA75 (AWD) | 2.5 L A25A-FKS inline-four (petrol) | petrol | 151 kW (205 PS) | |
| AXVH70 (FWD) | 2.5 L A25A-FXS I4 (petrol hybrid) + 5NM Electric motor | hybrid | 131 kW (178 PS) | |
| AXVH75 (AWD) | 2.5 L A25A-FXS I4 (petrol hybrid) + 5NM Electric motor | hybrid | 131 kW (178 PS) | |
| GSV70 (FWD) | 3.5 L 2GR-FKS V6 (petrol) | petrol | 224 kW (305 PS) |
Source: Toyota Camry (XV70), en.wikipedia.org.
History & notable variants
The XV70 Inc Facelift represents an incremental update to the XV70 generation of the Toyota Camry Hybrid, focusing on refining the vehicle's exterior styling and interior features. This facelift includes updates such as new front and rear fascias, revised lighting elements, and enhanced infotainment systems. The hybrid powertrain remains a key feature, offering a balance between performance and environmental responsibility.
Dimensions
| Length | 4,879 to 4,910 mm |
| Width | 1,839 mm |
| Height | 1,445 mm |
| Wheelbase | 2,824 mm |
Source: Toyota Camry (XV70), en.wikipedia.org.
Body styles & production
| Body styles | 4-door sedan |
| Produced | 1982–present |
Trim levels
Reliability & owner notes
- Pros: Enhanced fuel efficiency, improved hybrid powertrain performance, updated exterior styling, advanced infotainment system
- Cons: Limited availability of certain features in lower trims, higher cost compared to non-hybrid variants
- Common issues: null