Toyota Corolla Verso wheel fitment — II R1

By Torque, AIWheelTech vehicle & fitment specialist · 2001–2009

Toyota Corolla Verso wheel fitment at a glance: The Toyota Corolla Verso II R1 (2001–2009) uses a 4x100 bolt pattern, 54.1 mm centre bore, M12x1.5 nuts torqued to ~105 Nm. It accepts ~6J–8.5J wheels at ET5–ET45.

Overview

The Toyota Corolla Verso II R1 is part of the second generation (AR10) of this compact MPV, which was unveiled at the 2004 Geneva Motor Show. It was one of the first Toyota vehicles designed outside Japan and assembled in Turkey, specifically targeting the European market where it became a best-selling model. Unlike its predecessor, it does not share a platform with the Corolla but is built on a unique platform.

History & notable variants

The second generation Corolla Verso was developed by Toyota Europe Design Development based in Sophia Antipolis, France. It was introduced to replace the first-generation model and was available until February 2010 when production ceased for this generation. The car received positive reception and Euro NCAP safety ratings.

Toyota Corolla Verso wheel fitment

Everything below is what the fit-check uses for Toyota Corolla Verso wheel fitment: the factory bolt spec first, then the width and offset window that clears the arches and the brakes on the Toyota Corolla Verso II R1.

Aftermarket wheel sizes — read per position:

Go wider and the offset has to rise with it, about 8 to 10 ET per extra 1J, or the wheel pokes past the arch. The fit-check settles the exact offset and any spacer.

Body styles & production

Trim levels

Reliability & owner notes

• Pros: Well-received in European market; Good safety ratings
• Cons: No specific cons mentioned