Toyota Hilux Pickup wheel fitment — AN1P, AN1P-TMG
The Toyota Hilux Pickup AN1P, AN1P-TMG (2020–2026) uses a 6x139.7 bolt pattern, 106.1 mm centre bore, M12x1.5 nuts. It accepts ~7.5J–10J wheels at ET-9–ET42. That is the short version of Toyota Hilux Pickup wheel fitment; the full picture is below.
Toyota Hilux Pickup wheel fitment
Start with the hub. The Toyota Hilux Pickup AN1P, AN1P-TMG spec table gives the bolt pattern and bore; the second table is the aftermarket window for Toyota Hilux Pickup wheel fitment.
| Bolt pattern (PCD) | 6x139.7 |
| Centre bore | 106.1 mm |
| Bolt / thread | M12x1.5 (nuts) |
| Seat type | flat |
| Factory setup | square |
| Brakes | e11*2007/46*2587*..;e13*2007/46*1698*..;e6*2007/46*0337*..- Double Cab- Extra Cab |
| TPMS | direct |
Aftermarket wheel sizes — read per position:
| Position | Width | Offset |
|---|---|---|
| Front | 7.5J–10J | ET-9–ET42 |
Go wider and the offset has to rise with it, about 8 to 10 ET per extra 1J, or the wheel pokes past the arch. The fit-check settles the exact offset and any spacer.
Body styles & production
| Produced | 2020–2026 |
Factory colours
DECUMA GREY-MET.EMOTIONAL RED 2-MET.WHITE CRYSTAL SHINE/CRYSTAL PEARL-MET.CIRRUS WHITEAVANT GARDE BRONZE-MET.SILVER-MET.