Toyota Previa wheel fitment — III Facelift

By Torque, AIWheelTech vehicle & fitment specialist · 1990–2019

The Toyota Previa III Facelift (1990–2019) uses a 5x114.3 bolt pattern, 60.1 mm centre bore, M12x1.5 nuts. It accepts ~6.5J–8.5J wheels at ET35–ET50. That is the short version of Toyota Previa wheel fitment; the full picture is below.

Overview

The Toyota Previa III Facelift is not explicitly detailed in the provided REFERENCE. The REFERENCE focuses on earlier generations of the Toyota Previa, detailing its production from January 1990 to October 2019 across three generations. It does not provide specific information about a third generation facelift model or its exact production years.

History & notable variants

Not explicitly detailed in the provided REFERENCE.

Toyota Previa wheel fitment

Everything below is what the fit-check uses for Toyota Previa wheel fitment: the factory bolt spec first, then the width and offset window that clears the arches and the brakes on the Toyota Previa III Facelift.

Aftermarket wheel sizes — read per position:

As a rule, each extra 1J of width wants roughly +8 to 10 ET to keep the wheel tucked. The exact offset and any spacer are confirmed by the fit-check.

UK popularity & demand

Based on DfT VEH0124 vehicle-parc data (2025), there are approximately 2,807 Toyota Previa on UK roads, placing it in the top 22% of car models by volume across our fitment database.

A parc that size is why Toyota Previa wheel fitment is worth getting exactly right: a lot of owners are shopping for these numbers.

Source: DfT/DVLA licensed-vehicle statistics (VEH0124), matched to the AIWheelTech fitment database.

Body styles & production