Vauxhall GT wheel fitment — GM Kappa
Vauxhall GT wheel fitment in one line: The Vauxhall GT GM Kappa (2007–2010) uses a 5x110 bolt pattern, 65.1 mm centre bore, M12x1.5 nuts. It accepts ~6J–9J wheels at ET30–ET55.
Vauxhall GT wheel fitment
Start with the hub. The Vauxhall GT GM Kappa spec table gives the bolt pattern and bore; the second table is the aftermarket window for Vauxhall GT wheel fitment.
| Bolt pattern (PCD) | 5x110 |
| Centre bore | 65.1 mm |
| Bolt / thread | M12x1.5 (nuts) |
| Seat type | tapered |
| Factory setup | square |
| TPMS | none |
Aftermarket wheel sizes — read per position:
| Position | Width | Offset |
|---|---|---|
| Front | 6J–9J | ET30–ET55 |
Go wider and the offset has to rise with it, about 8 to 10 ET per extra 1J, or the wheel pokes past the arch. The fit-check settles the exact offset and any spacer.
Body styles & production
| Produced | 2007–2010 |
Factory colours
Carbon Flash / Grey MetallicTechnical Grey MetallicSchwarz II Solidn bluestone met.solar yellowkinetic blue met.dark ming blue met.blacklt.tarnished silver met.dark tarmished silver met.